Auto CheckIn Ezwave licence ?
Hi All , Is there a way to CheckIn Automaticly Ezwave licence ?I supose by using Deamon Options File but I don't see anything in the licence documentation ... Thanks in advance . Best Regards , Jérome
View Articlepower, speed, area analysis
dear sir,my self Gowda NP, i am a student of 8th sem ECE in East West Institute Of Technology. In my final year project, i want to do power, area, speed analyses. And i am working on IC station...
View Articlesetting filter default for each session
I am using:Calibre - RVE v2011.3_38.29 and I want to set the filter "Show Unresolved" as my automatic default for each session, no matter the library or cellname.Could you please tell me the startup...
View Articlehow to open a subcell in tcl command
to open a subcell, obviously you can specify the subcell name in the argument "-g $cell" when you launch the tool, but my question is, is there anyway to open a subcell in the tcl mode after you...
View ArticleSome cells - listed with calibredrv layout peek - are enclosed by "{}".
Some cells (listed with calibredrv layout peek) are enclosed by "{}". Why is this? How can I get rid off these characters? For example, the cell listing gives: {M2_M1$$208434220} 12_65LLLVT_NMOS...
View ArticleDESIGNrev scripts, a few basic templates
Wondering how to use DESIGNrev Tcl commands with scripts in batch mode? Here are some very simple templates you can use to get started. For command-line execution with user input:...
View ArticleClik here to view.
Creating a Tcl script from DESIGNrev session transcript
Here are some steps showing how to create a Tcl script based on operations and edits that have been done in a DESIGNrev session, On the DESIGNrev pulldown menu, select: File > Save Edit...
View ArticleHow to get the file handle of the layout in DESIGNrev (for use in a Tcl script)
Getting the file handle of the layout currently visible in DESIGNrev is frequently needed for use in Tcl batch scripts. Here's an example showing one way to create a layout file handle in DESIGNrev. To...
View ArticleDisplay just the polygons of a certain net in a DESIGNrev layout
It's possible within the DESIGNrev layout viewer to select a net and view it. (This is different than using the NET operation in DRC or ERC rulechecks to create output that is then viewed using RVE and...
View ArticleSetting user preferences for DESIGNrev
User preferences for DESIGNrev can be set by using pulldown menu choices. Use any selection on the Options tab to bring up the Preferences dialog. The changes are saved to a file. The default path and...
View ArticleHow to flat hierarchical layout by DESIGNrev?
Hi Guys, I intend to flat one hierarchical layout, but I did not know how to do?
View ArticleSet up DESIGNrev for OpenAccess Input
The following shows the setup needed to open an OpenAccess design in DESIGNrev 1) Before launching DESIGNrev set the following environment variables: CDS_INST_DIR <path to Cadence...
View ArticleUsing DESIGNrev to report all layers in GDS/OASIS file
You can use the "layout peek" command in DESIGNrev to output design layers. For instance, the example below shows the design contains layer 1 datatype 1 and layer 2 datatype 0. >calibredrv -a puts...
View ArticleFind cells referenced but undefined in a layout
Use the -undefcells switch in DESIGNrev to list cells referenced but not defined. For instance,>calibredrv -a puts [layout peek design.gds -undefcells]
View ArticleLoad Calibre Menu in Virtuoso
Add one of the following lines to the default Cadence startup file (.cdsinit), depending on your installation: • Standard installation (Virtuoso 5.x and earlier) load( strcat(...
View ArticleClik here to view.
Clips feature more accurately shares exact coordinate windows in Workbench or...
A way to more accurately share exact coordinate windows in WORKbench using Clips feature.(Not to be confused with SVRF command "LAYOUT WINDOW CLIP YES") Sometimes it is difficult to share coordinates...
View ArticleDisable automatic redraw in DESIGNrev
Starting with the Calibre 2012.1 release there is no need to halt or disable automatic refresh. There is new DESIGNrev drawing behavior that does not block the user interface so that drawing happens...
View ArticleCell map for Layout Export
Is there a cell map option in the Calibre Integration GUI? There is a setup entry available in Calibre Interactive when OPENACCESS is selected as the layout system. The option is available under (for...
View Articlelayout filemerge from command line
The following is an example of a script that will merge 2 layout files using the DESIGNrev Tcl batch commands that accept user input. The usage is as follows:$MGC_HOME/bin/calibredrv...
View ArticlePath converted to polygon in Calibre DESIGNrev
The default behavior is to convert paths to polygons on reading the layout into Calibre DESIGNrev. To keep paths from being converted, do one of the following:A) In Calibre DESIGNrev use File > Open...
View Article